FITTER I YEAR 1-200

 FITTER I YEAR 1-200

1 Which one is the personnel safety?

A Keep the machine clean

B Concentrate on your work

C Keep the gang way and floor clean

D Keep the tools at their proper place

Answer: B Concentrate on your work


2 Name the mandatory symbol.

A Stop

B Give way

C Guarded

D Unguarded

Answer: A Stop


3 Flammable of liquefiables solids are classified as.

A Class ‘A’ fire

B Class ‘B’ fire

C Class ‘C’ fire

D Class ‘D’ fire

Answer: B Class ‘B’ fire


4 Which is the immediate life saving procedure?

A First Aid

B Call a doctor

C Intensive care

D Medical treatment

Answer: A First Aid


5 Name the warning sign.

A School

B Guarded

C Unguarded

D Pedestrian crossing

Answer: C Unguarded


6 What is the class of fire caused by fire wood, paper, cloth?

A Class ‘A’ fire

B Class ‘B’ fire

C Class ‘C’ fire

D Class ‘D’ fire

Answer: A Class ‘A’ fire


7 Which fire extinguisher filled with carbon tetra chloride and bromochlorodifluoro methane (BCF)?
A Carbon dioxide
B Halon extinguisher
C Foam extinguisher
D Dry powder extinguisher
Answer:B Halon extinguisher

8 Which comes under mechanical occupational hazards?
A Noise
B Toxic
C Unskilled
D Unguarded machinery
Answer:D Unguarded machinery

9 How to stop bleeding of injured person?
A Tie bandage
B Apply ailment
C Apply tincture over the wound
D Apply pressure over the wound
Answer:D Apply pressure over the wound

10 What is the name of sign?
A School
B Guarded
C Unguarded
D Pedestrian crossing
Answer:D Pedestrian crossing

11 What are the three factors causes fire?
A Fuel, Heat, Oxygen
B Oxygen, Fuel, Nitrogen
C Heat, Nitrogen, Oxygen
D Fuel, Carbon-dioxide, Heat
Answer:A Fuel, Heat, Oxygen

12 Which fire extinguisher is used to extinguish class ‘B’ fire?
A Halon extinguisher
B Foam extinguisher
C Dry powder extinguisher
D Carbon-dioxide extinguisher
Answer:D Carbon-dioxide extinguisher

13 What is the period referred as ‘golden hours’?
A First 30 minutes after incident
B First 30 minutes after first aid
C First 45 minutes of admission
D First 60 minutes after treatment
Answer:A First 30 minutes after incident
-
14 What is the first step of avoiding accident in
work place?
A By wearing safety equipment
B Doing things in one’s own way
C By observing safety precautions
D Doing things with a highly skilled working
practice
Answer:C By observing safety precautions

15 What does the symbol denotes?


A Stop
B Give way
C Pedestrian crossing
D Over taking prohibited
Answer:B Give way

16 What is the colour code of bins for waste
paper segregation?
A Red
B Blue
C Black
D Green
Answer:B Blue

17 What is the kind of road sign?

A Police signal
B Cautionary sign
C Mandatory sign
D Information sign
Answer:D Information sign

18 Which fire extinguisher is used for flammable and running liquid fire?
A Foam extinguisher
B Halon extinguisher
C Dry powder extinguisher
D Carbon dioxide (CO2) extinguisher
Answer:A Foam extinguisher

19 What “A” denotes in ABC of first aid?
A Air way
B Attention
C Arresting
D Atmosphere
Answer: A Air way

20 What is the process of breaking down the materials into organic compounds and can
be used as manure?
A Land fills
B Recycling
C Composting
D Burning waste material
Answer:C Composting

21 What is the colour code for plastic waste bin?
A Red
B Blue
C Green
D Yellow
Answer:D Yellow

1 Name the part of file marked as “x”.

A Heel
B Tang
C Ferrule
D File length
Answer:A Heel

2 Which marking media is poisonous?
A White wash
B Prussian blue
C Copper sulphate
D Cellulose lacquer
Answer: C Copper sulphate

3 What is the name of the vice?
A Pin vice
B Pipe vice
C Hand vice
D Quick releasing vice
Answer: C Hand vice

4 Which chisel used for squaring materials at
the corners, joints?
A Flat chisel
B Cross cut chisel
C Diamond point chisel
D Half round nose chisels
Answer: C Diamond point chisel

5 Name the part of a hammer marked as ‘x’.
A Face
B Pein
C Cheek
D Eye hole
Answer: C Cheek

6 Which angle is represented by the symbol “γ” on the cutting chisel?
A Rake angle
B Wedge angle
C Cutting angle
D Clearance angle
Answer: A Rake angle

7 Name the property of metal which can be drawn into wire without rupture.
A Ductility
B Tenacity
C Elasticity
D Malleability
Answer: A Ductility

8 Read the measurement in the dial caliper.
A 24.2 mm
B 24.8 mm
C 25.2 mm
D 26.2 mm
Answer: D 26.2 mm

9 Which is an integral part of the stock in
vernier bevel protractor?
A Disc
B Dial
C Blade
D Main scale
Answer: B Dial

10 Name the part marked as ‘x’ of the file.
A Heel
B Edge
C Ferrule
D Shoulder
Answer: C Ferrule

11 Which file is used to make the job close to the finishing size?
A Single cut file
B Curved cut file
C Second cut file
D Double cut file
Answer: C Second cut file

12 Which file has the parallel edges throughout the length?
A Hand file
B Bastard file
C Rasp cut file
D Single cut file
Answer: A Hand file

13 What is the material to manufacture bench vice?
A Tool steel
B High carbon steel
C Medium carbon steel
D Cast iron
Answer: D Cast iron

14 Which marking media provide clear lines on machine finished surfaces?
A White wash
B Prussian blue
C Copper sulphate
D Cellulose lacquer
Answer: B Prussian blue

15 Which caliper is used to mark the centre of round bar?
A Jenny caliper
B Inside caliper
C Outside caliper
D Firm joint caliper
Answer: A Jenny caliper

16 Name the part marked as 'x'.

A Leg
B Peg
C Washer
D Fulcrum
Answer:D Fulcrum

17 Name the angular measuring instrument.
A Bevel gauge
B Bevel protractor
C Universal bevel gauge
D Universal surface gauge
Answer: C Universal bevel gauge

18 Which is used for filling narrow grooves and angles above 10°?
A Square file
B Half round file
C Triangular file
D Knife edge file
Answer: D Knife edge file

19 Which chisel is used for cutting oil grooves?
A Flat chisel
B Web chisel
C Half round nose chisel
D Diamond point chisel
Answer: C Half round nose chisel

20 Name the file.

A Barrot file
B Riffler file
C Crossing file
D Mill saw file
Answer: B Riffler file

21 What is the name of vice?

A Pin vice
B Pipe vice
C Hand vice
D Machine vice
Answer: A Pin vice

22 Which grinding machine is used for heavy duty work?
A Bench grinder
B Portable grinder
C Pedestal grinder
D Surface grinder
Answer: C Pedestal grinder

23 Which chisel is used for separating materials after chain drilling?
A Web chisel
B Flat chisel
C Cross cut chisel
D Diamond point chisel
Answer: A Web chisel

24 Which file is used for sharpening the teeth of wood working saws?
A Barrete file
B Tinker’s file
C Millsaw file
D Riffler file
Answer: C Millsaw file

25 Where will be the weight of the hammer stamped?
A Face
B Pein
C Cheek
D Eye hole
Answer: C Cheek

26 Name the property of metal to resist the effect of tensile forces without rupture.
A Ductility
B Tenacity
C Elasticity
D Malleability
Answer: B Tenacity

27 Name the part marked as 'x'.

A Anvil
B Thimble
C Spindle
D Spindle lock
Answer: A Anvil

28 What is the accuracy of metric outside micrometer?
A 0.01 mm
B 0.001 mm
C 0.02 mm
D 0.002 mm
Answer: A 0.01 mm

29 Name the part marked as 'x'.
A Lip
B Land
C Flank
D Point angle
Answer: D Point angle

30 Which type of taper is provided in the drill shank?
A Pin taper
B Metric taper
C Morse taper
D Jerno taper
Answer: C Morse taper

31 Which is used to remove drills and sockets from the machine spindle?
A Drift
B Sleeve
C Punch
D Hammer
Answer: A Drift

32 Name the tap wrench used in the restricted place.
A Box type tap wrench
B ‘T’ handle tap wrench
C Solid type tap wrench
D Double ended adjustable tap wrench
Answer: B ‘T’ handle tap wrench

33 What is the unit of feed in drilling operation?
A m/rev
B mm/rev
C m/min
D mm/min
Answer: B mm/rev

34 Name the part marked as 'x' in vernier caliper.

A Beam
B Fixed bar
C Depth bar
D Thumb lever
Answer: C Depth bar

35 What is the accuracy of protractor head in combination set?
A 1°
B 5°
C 5’
D 5”
Answer: A 1°

36 What is the accuracy of a try square?
A 0.02 mm per 10 mm length
B 0.004 mm per 10 mm length
C 0.002 mm per 10 mm length
D 0.001 mm per 10 mm length
Answer: C 0.002 mm per 10 mm length

37 Which punch is used for witness marks?
A Dot punch
B Pin punch
C Bell punch
D Centre punch
Answer: A Dot punch

38 What is the name of the caliper having one leg with an adjustable divider point and other leg is bent?
A Jenny caliper
B Inside caliper
C Outside caliper
D Spring joint caliper
Answer: A Jenny caliper

39 What is the name of part marked as ‘x’ in surface gauge?
A Nut
B Snug
C Spindle
D Scriber
Answer: B Snug

40 What is the name of part marked as ‘x’ in combination set?

A Bevel head
B Centre head
C Square head
D Protractor head
Answer: D Protractor head

41 Which type of datum is followed?
A Edge datum
B Point datum
C Centre line datum
D Reference line datum
Answer: A Edge datum

42 What is the name of parallel block?

A Solid parallel block
B Tenon parallel block
C Angular parallel block
D Adjustable parallel block
Answer: C Angular parallel block

43 Which chisel is used for removing material on keyways?
A Flat chisel
B Cross cut chisel
C Diamond point chisel
D Half round nose chisel
Answer: B Cross cut chisel

44 Which file is having rows of teeth cut in one direction?
A Single cut file
B Curved cut file
C Second cut file
D Double cut file
Answer: A Single cut file

45 Which file is used for filing wood and leather?
A Hand file
B Bastard file
C Rasp cut file
D Single cut file
Answer: C Rasp cut file

46 Which pitch of blade is used for cutting
bronze, brass and cast iron?
A 0.80 mm
B 1.00 mm
C 1.40 mm
D 1.80 mm
Answer: D 1.80 mm

47 Which type of hammer is used for riveting purpose?
A Sledge hammer
B Ball pein hammer
C Cross pein hammer
D Straight pein hammer
Answer: B Ball pein hammer

48 What is the unit of cutting speed in drilling operation?
A m/ rev
B mm/ rev
C m/ min
D mm/ min
Answer: C m/ min

49 What is the name of part marked as ‘x’ in drill?
A Lip
B Land
C Flank
D Web
Answer: A Lip

50 What is the name of part marked as ‘x’ in drilling machine?

A Drill chuck
B Feed handle
C Driving motor
D Depth gauge and stop
Answer: A Drill chuck

51 What is the minor diameter of thread?
A Minor dia = Major dia – (2 x pitch)
B Minor dia = Major dia + (2 x pitch)
C Minor dia = Major dia + (2 x depth)
D Minor dia = Major dia – (2 x depth)
Answer: D Minor dia = Major dia – (2 x depth)

52 What is the name of the part marked as ‘X’?

A Spindle
B Sleeve
C Thimble
D Spindle lock
Answer: C Thimble

53 What is the name of the part marked as ‘X’?

A Beam
B Main scale
C Fine adjusting nut
D Fine adjusting slide
Answer: D Fine adjusting slide

54 What is the name of the vice?

A Hand vice
B Bench vice
C Tool maker’s vice
D Quick releasing vice
Answer: D Quick releasing vice

55 What is the name of the part marked as ‘X’?

A Tip
B Heel
C Tang
D Safe edge
Answer: D Safe edge

56 Which marking media is applied to rough forgings and castings?
A White wash
B Prussian blue
C Copper sulphate
D Cellulose lacquer
Answer: A White wash

57 Name the file shown.

A Riffler file
B Tinkers file
C Barrette file
D Crossing file
Answer: B Tinkers file

58 What is the pitch of hacksaw blade used to cut conduit and other thin tubes?
A 0.8mm
B 1.0mm
C 1.4mm
D 1.8mm
Answer: A 0.8mm

59 Which metal cutting saws is used for cutting different profiles?
A Power saw
B Circular saw
C Contour band saw
D Horizontal band saw
Answer: C Contour band saw

60 What is the name of chisel?

A Flat chisel
B Web chisel
C Cross cut chisel
D Diamond point chisel
Answer: B Web chisel

61 What is the name of hammer?

A Mallet hammer
B Ball pein hammer
C Cross pein hammer
D Straight pein hammer
Answer: C Cross pein hammer

62 What is the name of angle between the axis of chisel and job surface while chipping?
A Rake angle
B Point angle
C Clearance angle
D Angle of inclination
Answer: D Angle of inclination

63 What is the property of metal that permits no permanent distortion before breaking?
A Tenacity
B Hardness
C Brittleness
D Toughness
Answer: C Brittleness

64 Name the part marked as ‘x’ in depth micrometer.
A Cap
B Lock
C Stock
D Thimble
Answer: B Lock

65 What is the name of drilling machine?

A Pillar drilling machine
B Gang drilling machine
C Bench drilling machine
D Radial drilling machine
Answer: A Pillar drilling machine

66 What is the accuracy of vernier bevel protractor?
A 1°
B 5°
C 5'
D 5"
Answer: C 5'

67 What is the reading of vernier caliper?


A 30.20mm
B 30.40mm
C 35.20mm
D 35.50mm
Answer: D 35.50mm

68 Which part of universal surface gauge is used to set scriber at required position exactly?
A Snug
B Guide pin
C Rocker arm
D Fine adjustment screw
Answer: D Fine adjustment screw

69 Convert one metre into millimetre.
A 10 mm
B 100 mm
C 1000 mm
D 10000 mm
Answer: C 1000 mm

70 What is the name of ‘V’ block?
A ‘V’ grooved ‘V’ block
B Single level single groove ‘V’ block
C Double level single groove ‘V’ block
D Single level double groove ‘V’ block
Answer: B Single level single groove ‘V’ block

71 What is the name of the part marked as ‘x’ in combination set?


A Rule
B Scriber
C Clamp nut
D Spirit level
Answer: B Scriber

72 Which caliper is used to find the centre of round bars?
A Inside caliper
B Jenny caliper
C Vernier caliper
D Outside caliper
Answer: B Jenny caliper

73 What is the name of angle marked ‘α’ in chisel?
A Rake angle
B Wedge angle
C Cutting angle
D Clearance angle
Answer: D Clearance angle

74 Which chisel is used for cutting curved grooves?
A Flat chisel
B Web chisel
C Cross cut chisel
D Half round nose chisel
Answer: D Half round nose chisel

75 What is the weight of hammer used for marking purpose?
A 200 grams
B 250 grams
C 300 grams
D 450 grams
Answer: B 250 grams

76 Which chisel is used to remove excess metal from welded joint and castings?
A Flat chisel
B Web chisel
C Cross cut chisel
D Half round chisel
Answer: A Flat chisel

77 What is the name of file?

A Rotary file
B Tinkers file
C Barrette file
D Crossing file
Answer: A Rotary file

78 What is the name of portion left between flutes in a drill?
A Lip
B Web
C Point
D Shank
Answer: B Web

79 What is the reading of vernier bevel protractor?


A 27°
B 67° 30’
C 157° 30’
D 159° 30’
Answer: C 157° 30’

80 Which part of outside micrometer ensure a uniform pressure between the measuring surface?
A Anvil
B Thimble
C Spindle lock
D Ratchet stop
Answer: D Ratchet stop

81 Which part of the vernier height gauge is an intergral part of the main slide?
A Jaw
B Base
C Beam
D Jaw clamp
Answer: A Jaw

82 Which part of the bevel protractor contact with the inclined surface while measuring?
A Dial
B Disc
C Blade
D Stock
Answer: C Blade

83 Which part in drilling machine is to achieve different speed?
A Flat pulley
B Jockey pulley
C Stepped pulley
D Fast and loose pulley
Answer: C Stepped pulley

84 What is the part marked as ‘x’ in pedestal grinder?


A Tool rest
B Eye shield
C Wheel guard
D Grinding wheel
Answer: A Tool rest

85 What is the name of file?


A Hand file
B Rasp cut file
C Single cut file
D Curved cut file
Answer: B Rasp cut file

86 What happens if the vice handle is over tightened?
A Spindle damage
B Hard jaw damage
C Fixed jaw damage
D Movable jaw damage
Answer: A Spindle damage

87 Which metal cutting saw is used to cut large cross section area?
A Power saw
B Contour saw
C Circular saw
D Horizontal band saw
Answer: C Circular saw

88 What is the name of gauge?


A Bevel gauge
B Angle gauge
C Surface gauge
D Universal bevel gauge
Answer: A Bevel gauge

89 Which file is used for manufacturing of dies and moulds?
A Rotary file
B Tinkers file
C Barrette file
D Rasp cut file
Answer: A Rotary file

90 Which vice is used for holding small work that requires filing or drilling?
A Pin vice
B Pipe vice
C Hand vice
D Tool maker’s vice
Answer: D Tool maker’s vice

91 Which hacksaw blade is used for cutting along curved lines?
A HSS blade
B All hard blade
C Flexible blade
D Diamond blade
Answer: C Flexible blade

92 Which chisel is used for cutting keyways?
A Flat chisel
B Cross cut chisel
C Punching chisel
D Diamond point chisel
Answer: B Cross cut chisel

93 Name the part marked “X” in hammer?


A Pein
B Face
C Cheek
D Eye hole
Answer: A Pein

94 Name the property of metal that withstand shock or impact?
A Tenacity
B Hardness
C Brittleness
D Toughness
Answer: D Toughness

95 What is the name of micrometer?



A Depth micrometer
B Inside micrometer
C Vernier micrometer
D Outside micrometer
Answer: A Depth micrometer

96 What is the name of tap wrench?


A Box type tap wrench
B Solid type tap wrench
C ‘T’ Handle tap wrench
D Adjustable tap wrench
Answer: B Solid type tap wrench

97 What is the reading of vernier caliper with inch graduations?


A 1.068”
B 1.459”
C 1.418”
D 1.409”
Answer: B 1.459”

98 Which part of combination set is used to mark and check angle of 90° and 45°?
A Rule
B Centre head
C Square head
D Protractor head
Answer: C Square head

99 Identify the type of “V” blocks?


A Single level single groove
B Single level double groove
C Double level single groove
D Double level double groove
Answer: C Double level single groove

100 How much carbon content of steel is forge able?
A Up to 1.2 %
B Up to 1.7 %
C Up to 1.9 %
D Up to 2.1 %
Answer: B Up to 1.7 %




















































































No comments:

Post a Comment

EMPLOYABILITY SKILLS – Semester 1(1)

  EMPLOYABILITY SKILLS – Semester 1(1) 1 A resume should be __________  A short and precise  B fancy and colourful  C having long and detail...